The STRATOS G2 Padded Belt combines the STRATOS G2 Belt with its dedicated removable Padding, creating a complete and comfortable MOLLE belt system expressly designed for heavy loadouts and/or prolonged use.
What’s new:
- A new 25 mm COBRA® buckle replaces the previous 45 mm buckle, reducing weight and bulk while
creating a cleaner, more streamlined profile.
- The new SnakeBite locking system prevents unintended loosening of the adjustment webbing
during use.
- The traditional 45 mm T13 webbing body has been replaced by a low-profile, laser-cut laminated
CORDURA® construction.
- Molded HT hook replaces the previous standard hook material, providing stronger engagement with
the loop surface and improved long-term durability.
- The revised size chart provides a better overall fit and greater overlap between adjacent sizes.
- Sizing is now standardized with the LIBRA Harness, creating one consistent size chart across our
belt systems.
- The updated inner belt features additional reinforcement in the adjustment area and a stiffer
removable insert, helping prevent it from folding inside the rear belt loop of the trousers.
What remains unchanged:
- The proven TEGRIS® composite MOLLE structure, combining vertical rigidity with horizontal
flexibility.
- The same bombproof construction and uncompromising quality.
- Full backward compatibility with existing dedicated accessories, including the STICK Angle Adapter,
Utility Hook and Utility Loop.
Features:
-
RIGIDITY: The TEGRIS® composite structure provides the vertical rigidity required to securely support pouches, holsters and other first-line equipment while maintaining horizontal flexibility around the waist.
-
STREAMLINED: The laser-cut laminated CORDURA® body and compact 25 mm COBRA® buckle reduce weight and bulk of the belt while maintaining the structural performance required for operational use.
-
SECURED: The SnakeBite locking system secures the adjustment webbing and prevents unintended loosening during movement or prolonged use.
-
FIT: To improve vertical stability of the buckle, route the adjustment webbing through the appropriate TEGRIS® MOLLE column. Simply identify the reference 0, I, II or III aligned with the male COBRA® buckle, remove the buckle, route the webbing through the corresponding column and reinstall it.
-
SUPPORT: The included STRATOS G2 Inner Belt features a reinforced area where the The reinforcement on the inner belt helping prevent wear and delamination where TEGRIS® adjustment tab slides. A stiffer removable insert provides additional support and helps prevent the belt from folding inside the rear belt loop.
- Made in Italy
Specs:
- Width: Based on size
- Height: 4,5 cm / 1,75"
- Thickness Inner Belt: 0,2 cm / 0,08"
- Thickness Outer Belt: 0,7 cm / 0,275"
- Thickness Padding: 0,5 cm / 0,20"
- Weight: (Medium) 400g | 14.1oz
STRATOS G2 - Size Chart:
To select the correct size, do not use your usual trousers size. Instead, measure your waist by following the steps below:
-
Wear the operational trousers you intend to use with the STRATOS Belt G2, positioned at their normal wearing height. Do not take the measurement while wearing civilian or casual trousers, as differences in rise and waistband position can significantly affect the resulting waist measurement.
-
Thread a flexible measuring tape through the belt loops of your trousers, as shown in the photo.
-
Pull the measuring tape firmly around your waist, applying approximately the same tension you would use when fastening the inner belt.
-
Check your waist measurement and compare it with the size chart below.
| Size |
Waist Measurement (cm) |
Waist Measurement (in) |
PALS/MOLLE |
| Small |
78 - 90 cm |
30.7 - 35.5 in |
18 to 22 |
| Medium |
86 - 98 cm |
33.9 - 38.6 in |
20 to 24 |
| Large |
94 - 106 cm |
37.0 - 41.7 in |
22 to 26 |
| X-Large |
102 - 114 cm |
40.2 - 44.9 in |
24 to 28 |
| XX-Large |
110 - 122 cm |
43.3 - 48.0 in |
26 to 30 |
USING THE STRATOS PADDING
The STRATOS Padding G2 increases the effective circumference of the belt system by approximately 4 cm.
If you intend to use the STRATOS Belt G2 with the STRATOS Padding G2, add 4 cm to your measured waist circumference before consulting the size chart.
Example: a measured waist circumference of 91 cm must be considered as 95 cm when using the Padding.
The STRATOS G2 Belt is not designed or certified for restraint, fall protection or rappelling. Improper use may result in serious injury or death. For a certified load-bearing belt and harness system, please refer to the LIBRA Harness.
Materials:
- Laminate: Mil-Spec Cordura® 500D DWR/NIR
- Webbing: Mil-Spec PA Nylon 6.6
- Hardware: AustriAlpin® COBRA® D-Ring SnakeBite
- Hook: Velcro® HT
- Loop: Velcro®
- Rigid Parts: TEGRIS® (Polypropylene Composite)
What's included:
- One BlackFolium - STRATOS Inner Belt G2
- One BlackFolium - STRATOS Outer Belt G2
- One BlackFolium - STRATOS Padding G2